The Pelonis 60 pint dehumidifier is one of the most efficient models from this manufacturer. It provides the most accurate and efficient control of ambient humidity, which prevents the formation of mold, mildew, cracking of structures. And due to the built-in filter, it reduces the concentration of allergens and other asthma triggers. And at the same time, it creates an unsuitable environment for the reproduction of dust mites.
Table of Contents
A quick review of the Pelonis 60 pint dehumidifier with a pump
The distinctive feature of this dehumidifier is the built-in pump for draining condensation water. It can be connected to the sewage system which allows the device to operate autonomously without any human control. You will only need to periodically check the condition of the filter, it is reusable, it can be cleaned under running water (without the use of detergents).
Unit dimensions are 18.78×14.17×24.61 inches. Net weight is 58.2 pounds. The color of the case is gray.
Pros:
The key advantages of the Pelonis 60 pint dehumidifier with pump are:
- high capacity;
- Effectively traps dust and other allergens;
- has a pump that allows you to organize the drain into any outdoor container or even connect it to the sewer;
- low noise during operation;
- supports automatic control of air humidity, but it is also possible to enable continuous operation;
- Turbo” mode for maximum rapid decrease of air humidity is supported.
Cons:
The only disadvantage is the size of the device. It is impossible to call it compact, but this is explained by the presence of a full cooling circuit with refrigerant (R410a). Also, as compared to the Pelonis 50 pints model, this dehumidifier Pelonis PAD60C1AGR makes more noise, comparable to the sound made by common household air conditioners (split-system).
A detailed review of the Pelonis 60 pint dehumidifier with pump
The Pelonis PAD60C1AGR dehumidifier review on the official website includes the following specifications:
- capacity – up to 60 pints per day (the exact figure depends on the area of the room where it is installed, as well as the rated ambient humidity level);
- minimum operating temperature – 41 degrees Fahrenheit;
- support of continuous operation mode, without the gyrostat;
- rated power (when using the “Turbo” mode) up to 420 W;
- Automatic defrost for more efficient condensation and lower power consumption.
And this dehumidifier uses an innovative filter that traps about 99.9% of airborne allergens. It also uses a newly designed cooling element, which has made it possible to significantly reduce the amount of refrigerant pumped in. Therefore, the unit is as safe as possible and the risk of ignition, even in case of wiring faults, is minimal (the refrigerant is a flammable gas).
Energy efficiency
Maximum current consumption – up to 420 W*h in “Turbo” mode without automatic shutdown. A dehumidifier has a built-in power supply (115V, 7 Amp). Type of plug – 5 – 15P. Approximate power consumption is 1 kWh per 2.8 liters of condensed moisture from the environment. When the built-in reservoir is full – automatically shuts off to save power.
Moisture removal
Claimed capacity of up to 60 pints per day. The built-in gyrostat can be set to automatically maintain humidity levels between 35 and 85%. Depending on the chosen mode and the current moisture concentration the rotation speed of the built-in fan changes.
The filter is replaceable and can be quickly removed.
Noise level
The noise level the dehumidifier makes when working indoors is not more than 55 dB. The maximum value is up to 59 dB (when using the Turbo mode, i.e. when the fan is rotating at maximum rpm). The casing is additionally sound-insulated on the inside, so there is no outside noise from the dehumidifier during operation.
Humidity control
The dehumidifier has two operating modes:
- Continuous, in which case it does not switch off, constantly sucking in air and passing it through the built-in cooling element with refrigerant;
- with automatic observance of the humidity level set by the user (from 35 to 85%).
To activate the fan, the deviation of the humidity level from the set level is up to 4%. Reviews of the Pelonis 60 pint dehumidifier indicate that it turns on only 1 – 2 times per hour (at a humidity control around 45 – 55%, which is most often used by average consumers). The air intake is from the back (where the filter is located), the air discharge is from the top.
Drain
The built-in reservoir capacity is 21.1 pints. It is possible to connect a hose to drain water to an external tank or sewer. The dehumidifier has a pump, so it is not necessary that it be located above the level of the external tank. The connection hose is included in the basic package.
Controls
The dehumidifier is controlled by means of touch keys located on the top edge (where the air circulation grille is located). There you can set the timer, set the level of automatic air humidity control (with a gyrostat), choose the current mode of operation (“Comfort”, “Turbo”). There are also indicators of automatic defrosting of the cooling element and the fullness of the built-in tank. There is also a display, which displays the current level of humidity.
Final thoughts
In reviews of the Pelonis 60 pint with pump dehumidifier, third-party publications often point out that this model is not Energy Star rated. That said, its energy efficiency is higher than that of the same Pelonis 50 pint (about 40% less electricity consumption for condensing the same amount of moisture). This dehumidifier is optimal for large rooms, houses, greenhouses, tents for growing plants.
All in all, the Pelonis 60 pint is one of the most productive and functional household dehumidifiers on the consumer market. And it can operate fully autonomously, as it has a built-in pump to pump out condensable moisture.
Leave a Reply