The Pelonis PAD30C1AWT dehumidifier is recommended by the manufacturer for installation in offices, bedrooms, basements, kitchens, living rooms. It automatically maintains an optimal humidity level between 35 and 85% (depending on the settings). It is a condensation dehumidifier with a cooling circuit with refrigerant (R410a).
Table of Contents
A brief review of the Pelonis 30 pint dehumidifier
How does the Pelonis 30 pint dehumidifier work? There are ventilation grills on its side edges. A massive fan draws in air which is sucked out to a cooling unit. The atmospheric humidity condenses and flows through the guide tubes into the tank installed in the lower part of the device. The operation of the fan is monitored by means of a relay sensor which determines the current humidity level.
Pros:
- Small size (15.24×10.24×19.69 inches);
- defrosting of the cooling circuit is automatic, so the dehumidifier can work around the clock;
- the device has a built-in washable reusable filter;
- Turbo” mode is supported for a maximum fast decrease of air humidity;
- It is possible to connect a hose to drain condensed water into the sewer or an external container, the connection tube is provided in the kit;
- economical consumption of electricity (rated power: 330 W * h);
- The built-in timer is set for 24 hours.
Also in reviews of the Pelonis 30-pint dehumidifier buyers note its attractive exterior design. It will fit harmoniously into any bedroom, living room, kitchen.
Cons:
- Of the disadvantages can be noted only the lack of a built-in pump. That is, when draining condensate into an external tank, gravity is used, so the dehumidifier, in this case, must be placed above the tank. Also, there is no backlighting of the touch buttons on the top edge.
A detailed review of the Pelonis 30 pint dehumidifier
The Pelonis PAD30C1AWT dehumidifier review on the manufacturer’s official website states the following specifications:
- The minimum operating temperature is 41 degrees Fahrenheit;
- electricity consumption – 1 kWh is used to condense 1.8 liters of water from the environment;
- Easy Move system support for easy initial setup of the appliance when first switched on;
- Capacity up to 30 pints per day;
- colors available – white and black;
- Net weight – 33.51 lbs;
- 12-month manufacturer’s warranty.
The built-in filter retains up to 99% of the dust from the air. It’s easy to remove and allowed to be washed. It’s also easy to purchase a replacement filter kit on the consumer market.
Energy Efficiency
The claimed power rating is 330 watts. But since this dehumidifier has an integrated gyrostat, it operates only 1 – 2 times per hour, while maintaining the set level of humidity. So, the total power consumption is about 6 kW*h per day at maximum efficiency (maintaining humidity at 35%). The dehumidifier is connected via a 115V 4,8 Amp power supply (plug type – 5 – 15P). Classified by Energy Star Rated (i.e. it is as energy efficient as possible).
Also worth mentioning in this review of the Pelonis 30 pint dehumidifier is the built-in non-volatile memory. It means that in case of a power outage all the settings are saved after the power is on the device automatically returns to the previous operating mode.
Moisture removal
The built-in gyrostat can control the humidity of the ambient air from 35 to 75%. It is possible to activate a continuous start-up. At the same time, it is periodically turned off to prevent the formation of frost on the cooling element (automatic defrosting system). Capacity – up to 30 pints per day, depending on the current humidity of the air, as well as the volume of the room in which the dehumidifier is installed.
Noise level
The minimum noise level emitted is 49 dB. When the Turbo mode is on, it does not exceed 53 dB. There is no sound notification when the tank is full, but a special light indicator “Full” on the top edge of the dehumidifier lights up instead. It does not emit any side noises.
Humidity control
The built-in gyrostat can automatically control the humidity at a pre-set level. The influence on the ambient temperature is minimal. It can be set between 35 and 85%. The deviation at which the dehumidifier is automatically actuated does not exceed 4%.
If Turbo mode is activated, it is automatically deactivated when the humidity level reaches the level set by the gyrostat. It then operates in “Comfort” mode, which has a positive effect on its energy efficiency.
Drain
The built-in reservoir has a capacity of 6.33 pints and is located on the bottom of the dehumidifier. There is a hose connection on the back wall (included) for draining condensable moisture to the outside. There are no sensors for pressure control, that is why it is necessary to monitor the level of water in the tank and to empty it timely.
Controls
The device is controlled by means of a control panel on the top side of the dehumidifier. There you can set the current mode of operation (“Comfort” or “Turbo”), turn on the timer, and set the desired level of humidity. There are also indicators for automatic defrosting and the fullness of the built-in water tank. There is also a mini-display that displays the current ambient humidity level during operation. And during setting, it shows the current timer and the set gyrostat readings.
All in all, this dehumidifier is one of the most affordable in its class. But its performance is enough even to set and maintain the optimal humidity levels in tents for growing plants. And this is complemented by its extensive functionality. If you connect a hose for water drainage, it can work completely autonomously, just periodically check the condition of the filter.
Leave a Reply